Blazemaster® CPVC Fire Sprinkler Systems



Blazemaster® Fire Sprinkler Systems (CPVC)

Superior Performance, Durability and Safety

Developed for use in fire sprinkler systems, Blazemaster® pipe and fittings are made from post-chlorinated polyvinyl chloride (CPVC) and are fully approved for use in NFPA 13 Light Hazard applications in both new and retrofit construction such as high buildings, apartments, hotels, schools and single-family homes.

BlazeMaster® CPVC systems are backed by extensive in-field service, including project design and installation support, as well as guidance on national and regional building code compliance.


ASTM Standard and Code Compliant

Approved for more applications than any other non-metallic system, Blazemaster® CPVC systems exceed ASTM and other industry standards and meet all major building and mechanical codes requirements.

Blazemaster® pipe and fittings are ideal for wet automatic fire sprinkler systems and offer an outstanding combination of features including simple assembly, lightweight construction, lack of rusting, pitting or scaling, and low friction loss.


Rigorously Tested For Performance and Quality

With a high flash ignition temperature, low flame spread and smoke development ratings, and a fuel contribution of 0, Blazemaster® is an ideal choice for fire sprinkler applications.

Developed to meet the stringent requirements on use of combustible pipe in buildings, Blazemaster® pipe and fittings have been successfully tested to flame temperatures of as high as 1400°F. When subjected to pressure tests run at 400 psi (more than twice the rated pressure) for a period of more than one year, Blazemaster® systems failed to show signs of weakness or failure.


computer resources3

top resources

Learn more about BlazeMaster® Fire Sprinkler Systems (CPVC)

Our resources section covers everything you need to know Check out top resources below:



Chlorinated Polyvinyl Chloride (CPVC)

3/4″ – 3″ (20mm – 75mm)

Continuous service of 175psi at 150°F (1207 kPa at 66°C)

Concealed and exposed, UL and ULC Listed for use in NFPA 13, 13R, and 13D Light Hazard applications including high rise buildings.

FM Approved, NSF certified, and permitted for use in air plenums per NFPA 90A.

Wet Automatic Fire Sprinkler Systems

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer, your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Back to top