Protecting workers & the environment from contaminated air
PVC & CPVC Ventilation Duct is a corrosion-resistant, effective, and lightweight solution for industrial and institutional ventilation systems.
IPEX Ventilation PVC and CPVC Duct pipes safely convey exhaust fumes generated by various industrial processes. For use in industrial and institutional fume handling systems requiring high resistance to corrosive vapors. This is used in industrial applications such as:
- Semiconductor & Electronics
- Pharmaceutical manufacturing Chemical processing
- Food and Beverage
- Pulp & Paper
- Laboratory installations
- Wastewater Treatment Plants
- Metal plating & finishing
features & benefits
- Low installed cost compared to noncorrosive metallics and PVDF
- Lightweight allows longer runs and speeds installation with simple tools and piping techniques
- Low maintenance requirements over extended service periods
- CPVC withstands exhaust temperatures up to 200°F
The specification section covers the details you need for your project.
Extruded seamless PVC & CPVC duct available in all standard diameters 6″ through 24″
Fitting Types: Tee, 90° & 45° Elbow, Coupling, Cap, Wye, 90° & 45° Pant Leg, Flange, and Butterfly Damper.
Rigid PVC (polyvinyl chloride) used in the extrusion of Ventilation Duct pipe complies with the material requirements of ASTM D1784 (formerly Type 1, Grade 1) and has a cell classification of 12454.
All extruded PVC Ventilation Duct pipe shall be manufactured from PVC compound conforming to ASTM D1784 (formerly Type 1, Grade 1) and have a cell classification of 12454. The compound used to extrude PVC Ventilation Duct Pipe shall conform to CAN/ULC S102.2 and exhibit a flame spread rating of 10.
Rigid CPVC (chlorinated polyvinyl chloride) used in the extrusion of Ventilation Duct pipe complies with the material requirements of ASTM D1784 and has a cell classification of 23447.
The compound used to extrude CPVC Ventilation Duct Pipe shall conform to CAN/ULC S102.2 and exhibit a flame spread rating of 10 and a smoke development classification of 25.
PVC and CPVC Ventilation Duct pipes are marked as prescribed in the above applicable standard to indicate the size of pipe, material designation, compliance to the standard, and manufacturer’s name or trademark.
Raw materials used in the extrusion shall contain the standard specified amounts of color pigment, stabilizers, and other additives. The pipe compound must be Corzan® grade and exhibit a flame spread rating of 10 and a smoke development classification of 25 when tested in accordance with CAN/ULC S102.2. The Corzan® CPVC compound is listed on FM 4910 “Clean Room Materials Flammability Test Protocol”.
All pipes shall be produced using Corzan® compound and be produced by one manufacturer as supplied by IPEX.